Operational processing material and finished body, allowing users without modifying the cad model case, can facilitate the conduct of high roughing and finishing calculations. For mold electrode and slider nc program production is very convenient. A broken line part of FIG. 6 and FIG. 7 for the processing of the material shape, FIG. 6 is a rough-cut contour reciprocating example, Figure 7 is a contour along the surface finishing tool paths.

     With a tolerance cutting function

     Cad mold industry information received, often provided upstream iges files. So often there will be gaps and overlaps between surfaces situation cad model of processing. ug cutting function provides tolerance. Within the tolerances set by the user can automatically handle gaps and overlaps between surfaces, and produce good toolpath.

     On the individual processing surfaces, you can set different amounts of processing aside

     In the mold design, because the geometry of the finished product specifications often need to define different flesh, clamping surface, by breaking the surface and generally finished surface. In order to respect the set nc nc programmer cad program on a single model, ug let nc designer to set different reserve amount (positive and negative) on the individual processing surfaces, in order to improve design efficiency of nc program.

     Offers a variety of feed / retraction mode ug provide high cutting lines, polylines, arcs, and other import / retraction way to meet the needs of the actual processing. Users can set different pre-drilled holes at the same time the location and depth of the drilling depth in different areas or processing areas. ug feed can also depend upon the processing and tool geometry definition, automatically determined by the pre-drilled oblique feed or feed, to meet the actual processing requirements.