Axial machining

Axial processing or from 5mm diameter counterbore since the cutting width from 1mm onwards. Grooving depth depends on the blade used. In the standard procedure in the axial direction of machining, horn's axial machining dmin = 5mm, the cutting width of 1mm, the maximum notch depth is 2mm. From the outside diameter of 20mm and 3mm from the cutting width, can use the a110-type knife, cut the maximum groove depth is 30mm. Special streamlined ultra-small blade, there are no limits on the blade may be placed within the diameter range. To make this multi-blade can be configured Switzerland urma tool company, paul horn company developed a knife or box cutter holder, it can with the tools manufactured by urma system intramax linked workpiece machining groove diameter from 5mm to 150mm.

Boring processing

In order to complete the drill boring, self-starting 0.3mm diameter, almost all of the blades can be used. In this, the configuration of the knife blade can be used for all folders. Its fine boring heads in mm accuracy range for adjustment. For high precision machining is concerned, there can be used for fine boring heads balance compensation is available, this can work out fine boring head with a trace of the workpiece surface and perfect geometry.