Compared with most other metal materials processing titanium processing requires not only higher, but also more limited. This is because the titanium alloy has metallurgical properties and material properties and cutting action may have a serious impact on the material itself. However, if you select the appropriate tool and used properly, and in accordance with the requirements of titanium machining tools and configuration optimization to the best state, then fully meet these requirements, and achieve a satisfactory performance and perfect results. Many of the problems of traditional titanium metal processing encountered is not inevitable, as long as the property of overcoming the effects of titanium machining process, can succeed.

Various properties of titanium make it a part of a material having a strong attraction, but many of the properties but also affect its workability. Titanium has excellent strength - weight ratio, usually only 60% of the density of steel. Titanium elastic coefficient lower than steel, and therefore harder texture, better deflection. Corrosion resistance of titanium is better than stainless steel, and low thermal conductivity. These properties mean that titanium metal in the process will produce a higher and more concentrated cutting forces. It is prone to vibrations caused by tremors occur when cutting; and, it is easy to react with cutting tool materials in cutting Shihai, thus exacerbating the crater wear. In addition, its thermal conductivity is poor, mainly due to the heat in the cutting zone, so the processing of titanium metal tool must have a high fever hardness.