1. Acrylic cutting, it is recommended to use a single blade spiral cutter, characterized by the processing of tasteless smoke-free, high speed, high efficiency, non-stick dust, real environmental protection, its special manufacturing process to ensure that no population explosion processing acrylic , fine knife pattern (or no knife pattern), the surface is smooth. Machined surface required to achieve a matte effect, it is recommended to use three double-edged blade spiral cutter.
2. MDF Cutting, recommended the use of large chip double-edged spiral cutter having flutes, two high-capacity double-edged design, both good chip function, but also a good tool to achieve balance, when processing high density, not black, not smoke hat, long life and other characteristics.
3. Aluminum Cutting, recommended the use of special aluminum single blade cutter. Process sticking to the knife speed, high efficiency.
4. The precision machining of small relief recommended round bottom graver.
5. cork, MDF, native wood, PVC, acrylic large deep relief processing, and recommended the use of a single-edged spiral ball end mill.
6. On the following burr-free cutting, it is recommended to use a single blade, double-edged upper and lower cutters.
7. The high-density, solid wood edge tooth cutter is recommended.
8. plywood, plywood processing, and recommended the use of double-edged straight groove cutter.
9. The effect of the lower knife, burr-free surface on processed products, the processing will not be rocker.
10. acrylic mirror engraving recommended diamond graver.
11. roughing particleboard and other recommended multi-stripe cutter (end)
